Pepwave Device Connector IP55, 802.11ac/a/b/g/n 2x2 MIMO
Pepwave Device Connector IP55 - Works as a Subscriber to any WiFi access Point to provide a remote wired connection point
The Device Connector enables Ethernet devices to access wireless networks with unbreakable reliability. Using our signal bonding technology, Ethernet devices can connect using the combined bandwidth of 2.4GHz and 5GHz frequency WiFi in a single wired LAN connection. The Device Connector is compatible with any access point, so you can just drop it in and go.
Get the Coverage You Need Without Setup. Plug-and-Play.
Easily extend Wi-Fi coverage in minutes with Pepwave’s Device Connector IP55. The Device Connector gets your devices talking over a large area without wires or configuration headaches. And because it works transparently at Layer 2, the Device Connector is compatible with any access point.
Turn your 2.4GHz and 5GHz Signals Into One Connection.
Normally, Wi-Fi devices will force you to choose between 5GHz or 2.4GHz. With the Device Connector IP55, you can have both. Simply connect your device to the Ethernet port and the device connector will combine 5GHz and 2HGz into a single reliable connection.
Using the Device Connector IP55, the IP camera is able to upload videos using both the 5GHz and 2.4GHz frequencies at the same time. If one frequency loses connectivity, the other will seamlessly take over. If the network is using an AP from another vendor, frequency combination can also be achieved by forming a SpeedFusion tunnel between the device connector and a SpeedFusion-enabled router. The Device Connector IP55 can also combine a wired landline connection and a Wi-Fi connection. This configuration provides extra connection resilience and diversity: if one connection breaks, the other can still take over.
Long-Range Outdoor Wi-Fi that Can Weather the Storm For SCADA System
Waterproof and lightweight with Wi-Fi that goes the distance, our Device Connector IP55 models are ideal for:
Supervisory control and data acquisition (SCADA)
The Device Connector IP55 models also support 1x 802.3at PoE output (with the optional PEP-ACW-109 Licence) so you can power another single device including surveillance cameras or other peripherals on a single power source, reducing cabling hassles and deployment complexity.